Hvordan oppdaterer jeg firmware på min VeEX enhet?

Chassis

Soft update

Hard update

1. With unit powered OFF, connect the OTG cable to the micro-USB interface and insert the USB stick
2. Press & Hold the Power button until hear the beep sound - the upgrade process will start automatically, and the WiFi/BT connection LED will blink twice intermittently
3. When the upgrade is complete, the unit Will beep again and re-boot itself. Once rebooted, the Power,WiFi/BT and battery LEDs will all be solid ON.
4. Remove the OTG cable and the OPX-BOXe is now ready to use.

USB stick

1. FX150 OTDR installer package can be recognized by its fxl 50-veex-arm.tar.gz file name. Extract this file from the ZIP folder and copy to the root of a FAT 32 USB memory stick
2. Turn off FX150. Connect USB stick via OTG cable to FX150 micro-USB port and connect AC adapter.
3. To begin the upgrading process simultaneously press and hold HOME+POWER buttons until you hear beep. Then release both buttons. FX150 will start the upgrading and automatically power down when upgrade is finished.

Web Remote Access

1. FX150 OTDR installer package can be recognized by its fxl 50-veex-arm.tar.gz file name. Extract this file from
   the ZIP folder and copy to your PC.
2. Turn on FX150. Connect FX150 OTDR to network via WiFi or Ethernet dongle.
3. On PC, type the FX150 IP address into your browser to display the Web Remote Access screen.
4. Tap the Upgradecommand and select the upgrade file to start the upgrade process. Unit Will automatically power down when the upgrade is finished.

Se Resources -> Release_Notes på 

https://veexinc.com/products/400g-test-module?product=RXT-6400&q=rxt6400

Se Resources -> Release_Notes på 

https://veexinc.com/products/rxt6402?product=RXT-6402&q=rxt6402

Kommer